Generac 50 Amp Power Management Module (PMM)

Power Management Modules are used in conjunction with the Smart Switch to increase its power management capabilities.  It gives the Smart Switch additional power management flexibility not found in any other transfer switch.  Not compatible with pre-wired switches.

The Digital Power Management system consists of two parts. The first is the PMM (Power Management Module) Starter Kit, which includes the easily field installed 24VAC transformer and the first 50 amp, 24VAC actuated PMM. The transformer must be installed in the NEMA 3R Smart Switches to enable the use of PMMs. The second is the PMM, a 50 amp, 24VAC actuated contactor housed in a NEMA 3R enclosure for indoor and outdoor installation applications. Through the use of the PMMs in conjunction with any of the 100-800 amp, single phase switches, household or business loads can be intelligently managed enabling the use of a smaller, more efficient generator system. Up to four PMMs can be used with a single switch. Both the PMM Starter Kit and individual PMMs have a one year limited warranty.

Part number 6186 is for an individual Power Management Module, THIS IS NOT THE REQUIRED STARTER KIT.  The starter kit is required before you can use an individual Power Management Module.  Add it as an option above if needed.

Note: The Starter Kit and PMMs will only work with the RTSR and RTSY transfer switches.